TP-Link routers are one of the best budget-friendly routers in the current market. To fulfill all the Internet needs, the TP-Link routers are quite handy and easy to install. But there can be certain situations, where you need to set a static IP address on your TP-Link router.
So, if you are wondering how to set static IP address on TP-Link router, this guide can be helpful for you. Hence, you can go through this article to set a static IP address by following simple steps. It will also discuss why setting a static IP address on your router can be beneficial.
Now, take a look at the next section to understand the purpose of static IP addresses and instructions to set them.
The Ultimate Purpose Of Setting A Static IP Address
There can be various reasons for setting up a static IP address on TP-Link routers. So, we will mention some of the important ones in the following points.
- For the Port Forwarding or Packet Forwarding process.
- For the Traffic Shaping and Bandwidth Priority, you can set a static IP address.
- A static IP address is used in case of enabling the Parental Control & Access Control features.
- Setting a static IP address is also very useful in Server Applications.
If your purpose of setting a static IP address matches with any of the points above, then move to the procedure section.
Stepwise Procedure To Set A Static IP Address On Your TP-Link Router
Before you set up the static IP address on your TP-Link router, you need to perform some initial processes. To do so, follow the below-mentioned information.
Process 1: Server Setup
In the beginning, you need to set up your server. The steps to carry it out are as follows.
- At first, consider two LAN cards and mark them as LAN1 and LAN2. Take the LAN1 card and plug-in the static IP cable provided by your ISP.
- From the LAN1 card properties, set the static IP configurations by consulting your ISP. Check any random website to confirm that the Internet is working.
- Open the LAN2 card properties and set the IP address of the TP-Link router as 192.168.137.1. For the Subnet Mask, set the value as 255.255.255.0.
Leave everything else blank and save the changes. After this process, follow the next one.
Process 2: TP-Link Router Setup
In case, you haven’t set up the TP-Link router, then you can refer to the process as discussed below.
The default TP-Link router IP address is 192.168.0.1. So, this will not change. Here, the TP-Link router has one WAN port and four LAN ports. Hence, connect the system to the router through the LAN cable or the Ethernet cable.
In the computer’s LAN card properties, set the “Obtain an IP address automatically” option. Also, you have to set the “Obtain DNS server address automatically” option.
On a web browser, enter 192.168.0.1 in the address bar and then hit the Enter key. On the login page, enter your TP-Link router page as ADMIN.
In the Network section, go to WAN and select the “Dynamic IP” option. Return to the main page of the Network section and set the LAN’s IP as 192.168.0.1.
Now, in the Wireless section, give the wireless network a suitable name. Then set the wireless security password to secure your router network. Save the settings and now your TP-Link router is ready to setup.
Now, you can move to the next section to set up the static IP address on your router.
Process 3: Set the Static IP address on your TP-Link Router
Although TP-Link has many router models, the static IP address setup process is similar for all devices. Hence, follow the steps provided below to set the static IP address.
Step 1: Know your Device’s MAC Address
For Windows-based PC, click on the Start menu and then type “Run” in the Search box. Now, click on the Run dialog box and then type “cmd”. Hit the Enter key to open the Command Prompt window.
Inside the window, type “ipconfig /all” and then press the Enter button. From the results, look for “Ethernet adapter Local Area Connection”. Under the “Description” part, look for Physical Address. This is your MAC Address.
Step 2: Get to Know the Host Name
The Host Name is usually your machine’s name that you are connecting to the TP-Link router. In Windows OS, open the Control Panel. Then navigate to the “System” section and open the “Computer Name” tab. Here, you can view your Host Name.
In Ubuntu or Linux Mint, type the command “hostname” on the terminal and then you can see your Host Name. In Android, go to the “Settings” menu and then tap on the “About Phone” option. Then, you have to tap on the Status option to select the WiFi MAC Address.
So, this is how you can get to know the Host Name of your system. Now, navigate to the next step.
Step 3: Login to Enable the Address Reservation Feature
To enable the Address Reservation feature, you can log into your network router’s home page. After logging in, from the left menu, navigate to the “Address Reservation” option. Then, select the DHCP option under the “Advanced Settings” section.
Here, click on the “Add New” button and then fill the correct details in the “MAC Address” and the “Reserved IP Address” field. After that, click on the “Enable” button to turn on the feature. Now, you need to restart the TP-Link router so that the static IP address can be activated.
Note that, TP-Link routers label their IP address mapping with the “Address Reservation”. So, enabling this will enable the static IP address on the routers as well.
By following this guide hopefully, you will be able to activate the static IP address on your TP-Link router. We hope that this post has helped you to set a static IP address on the TP-Link router.
If you are unable to apply the steps or want more guidance on setting an IP address for routers, leave your response in the comments section.