Routers are important in building a connection between the ISP (Internet Service Provider) and the device. Despite being a beneficial electronic gadget, users often face several difficulties while using a routing device. D-link users often complain that there is no lights on D-link router, which is an annoying situation. 

Most of the time, this problem will happen with the Internet light. When this issue occurs, then the LED of the Internet indicator stops to blink. 

Nowadays, you don’t need to buy an additional modem to connect with the wireless router. As most of the router models come with an in-built modem in them. So, if your Internet light is not working on the router’s panel, this article may help you to get rid of this issue. 

Here, you will see some of the easiest tricks that can help you to solve this issue. So, you can take a look at the segments we are going to discuss below. 

How to Solve No Lights on D-Link Router Issue?

If you don’t see any light on the Internet LED indicator, it indicates that there is no transmission of data between the ISP and the router. This issue is mostly happened due to any problem in the telephone line that is installed at your place. Whenever it breaks the connection using the RJLL connector, the D-Link router won’t show any lights.

You can easily solve this no lights on D-link router issue using by performing the steps provided below: 

  • First and foremost, you have to unplug the copper line or telephone line from the router. 
  • Then, connect the copper line with a telephone set. Dial a number from the telephone. You can just give a missed call to any number. 
  • Now, you have to reinsert the copper cable back into the router port. Afterward, restart the router. 

After that, you will see that the internet LED indicator gets back and it will start to blink with green color. But, if it’s not, then you can try some general fixes described below: 

Reboot the Router: 

A simple reboot of a router can solve a lot of network problems. It includes websites not loading properly, connection dropping, the wireless is flaking out, etc. Hence, just try to reboot the router and see if it make any changes in the current situation. 

The rebooting process of a router is also simple. First, unplug the power cable from the electrical source. Then, wait for a few seconds and re-connect it. 

If there are several modems, then you can unplug the power cable of all the modems. Also, connect it back after waiting for a few minutes. Some routers come with the Power switch separately but, the disconnect and re-connect process applies for all the routers. 

After rebooting the router, if you see that the lights are still not blinking, you can continue with the next solution. 

Check for Overheating: 

Like all the electronic gadgets, routers can also fall prey to overheating. Due to the overheating problem, you can also face this issue. 

Hence, you need to check the temperature of the router. If you see that it seems too hot, make sure that the router is getting sufficient airflow. 

Afterward, check the vents of the router. If your router is placed in a hot place or if the vents are blocked, the overheating problem may arise. It can result in ‘no lights on router’ issue as well. 

So, if you see that there are overheating problems on the router, you can check the cable of the router. If they are connected properly with the system, it can lit the lights on the router. 

Check the Cables: 

If the cable connection becomes loose or unplugged, you won’t get any lights on the router. Hence, you have to make sure that all the cables are connected securely. 

Here, you also need to check the modems and the power cables of the routers. Check the cable between the modem and the router as well. Afterward, check the cable between the wall socket and the modem. 

Furthermore, you can disconnect all the Ethernet cables and connect them back into the router. Now, you can check if the issue is resolved. Else, move on to the next solution stated below. 

Change the Wireless Channel: 

If there are several wireless routers available in your location, it may lead to this specific error. Since the router is subject to interference from other broadcast routers, which are sending the signal on the same frequency. Hence, you can change the wireless channel and check if you can see the light on the router. 

These are the possible fixes to lit the light on your Netgear router. We hope, after successfully implementing the above steps, it will surely help to solve this issue. In case, there are no lights on router, share your issues in the comments below. We will try to fix your problem as soon as possible.