Home Blog

How To Fix Netgear Router Login Error 401

0

The Netgear Router Login Error 401 occurs when a website fails to load due to a login error. Thus, it will ask you to enter the correct credentials before visiting any website. Here, you are asked to enter the login credentials of your router. 

This error message is displayed as “HTTP Error 401 – Unauthorized”. It might also appear as “Netgear router login error 401”, “401 unauthorized error Netgear” and other similar formats.  

Simple Solutions to Fix ‘Netgear Router Login Error 401’

Here, we are going to discuss three simple solutions that can help to fix the Netgear router login error 401. Hence you can resolve this issue by following these solutions below. 

Solution 1: Check the URLs

Spelling errors are very common in a URL. Thus, it can cause the Netgear router login error if you have entered the wrong website. Thus, you have to make sure that you’re entering the correct URL for the website you wish to visit.  

Additionally, you should check for the page’s existence. If the page is removed, then you must jump to another link associated with that specific topic. Sometimes, web developers modify webpages to launch a new website entirely.

Solution 2: Check your Login Credentials 

You will face the Netgear Router Login Error 401 if you enter the wrong password on the login page of your router. As a result, you will not be able to access any website. Thus, you should follow the tips below to avoid this issue.

  • Make sure that you haven’t misspelled your username or password.
  • Copy and paste the password by entering it on a Notepad first. This way, you will not make any mistake of entering the wrong characters or digits. 
  • Passwords are highly case-sensitive. Therefore, make sure that you’re using lower-case and upper-case letters correctly.

Solution 3 – Clear Browser Cache  

Sometimes, old browser caches and junk files can cause a 401 unauthorized error in Netgear routers. Thus, you may have to clear these caches and login once again after entering the correct credentials. 

Here, we have shared instructions for clearing browser cache in Google Chrome and Mozilla Firefox. 

Google chrome 

  1. Click on the three dots of the top right side of the window. Next, select and go to Settings. 
  2. Subsequently, type ‘cache’ in the search field. Here, you will see an option for ‘Clear Browsing Data’. Simply, click on it. 
  3. Next, choose ‘Cached Image and Files’. Also, you have to select ‘Cookies and other Site Data’ as well.
  4. Finally, click on ‘Clear Browsing Data’ when the prompt appears.  

Mozilla Firefox

  1. Click on the three bars to open the menu. It is located in the top right of the window. Next, head over to Options. 
  2. Here, you need to select Privacy and Security from the left menu pane. 
  3. Next, go to Cookies and Site Data and select Clear Data. 
  4. Finally, choose both Cache and Cookies options and again, click on Clear.  

Conclusion 

To conclude, we have listed out three different solutions to resolve this annoying issue. However, you should consult an expert technician if you’re still facing this problem. Alternatively, you can reset your Netgear router to change your login credentials. The steps to do this varies from model to model. Thus, you can check your router’s user guide to learn how to do this. 

Linksys Parental Controls Not Working | Steps To Fix Router Problems Quickly

0

Linksys routers are preferred by many users for its Smart WiFi feature and security settings. However, it can lead to unauthorized access to certain websites if the Linksys parental control is not working. 

Also, this can create a risk for your valuable files as it can be accessed via the Linksys router. Therefore, you have to fix its settings to limit access or block someone from using the Internet.

Things to try When Linksys Smart WiFi Parental Controls are Not Working

Generally, it indicates a technical error when Linksys parental controls are not working. Thus, you can try the following quick fixes to resolve this issue. 

  • Updated your router’s firmware.  
  • Run a full system scan. 
  • Resolve Server Issues. 
  • Turn off Bridged Mode on your Linksys router. 

Steps for Fixing When Linksys Parental Controls are not Working

Here are a few steps that can help you to resolve your router’s issue. Thus, you may be able to get back parental controls by following the given steps. 

Step 1- Sign into Your Linksys Router Dashboard

In order to log into your Smart WiFi or Velop dashboard, you will have to access the official website of Linksys. You can also type the IP address of this router, which is http://192.168.1.1. 

After visiting the sign-in page, you need to type your User Name and Password that was provided with the Linksys device. If you have changed the credentials or forgot them, try to consult your ISP or a router specialist.

Step 2-  Check Parental Controls Settings 

Somehow, if the feature of Parental Controls has been not working on your router, you need to check the settings. Hence, run the Linksys Connect software and go to the section of ‘Parental Controls’. 

Next, check if ‘Parental controls password’, ‘Verify password’, ‘Security question’, and ‘Answer’ is entered correctly. Any wrong details or mismatch in this information can prevent Linksys parental controls from working normally. 

Afterward, check to see if parental controls have been set for the specific device giving this error. If not, you will have to add the device and test if you can block the Internet or websites on it. 

Generally, you can add up to five devices and enable the option of ‘Parental Controls’ on the Linksys router. Hence, navigate to the symbol of positive ‘+’ on the router setup page and add the devices accordingly. 

Furthermore, you can hit the tab of ‘Control a Device’ and choose a device from the drop-down list. 

Step 3- Turn off IPv6 Connection 

Another reason for this issue was found to be the IPv6 connection. Thus, you can resolve parental control not working by simply turning it off. You can do this by following the given instructions. 

  1. First, open a browser and go to your router’s main page. Enter your login credentials and login to your router. 
  2. Next, go to the Connectivity tab and select Internet Settings. 
  3. Here, you will find an option for ‘Type of Internet Connection’. Thereafter, you will see an option for IPv4 and IPv6. 
  4. Click on IPv6 and go to Edit. Next, click on the checkbox beside IPv6 – Automatic to uncheck it. 
  5. Finally, click on Apply and Ok. 

Conclusion  

To summarize, the Linksys parental controls should start working normally. You may have to contact technical support if you’re still facing this issue. This error is being faced by the majority of Linksys router users. 

How to Fix Asus Router Authentication Error

0

Asus router authentication error occurred generally due to some issues in WAN connection or incorrect IP address. Similarly, hardware faults can cause this error as well. As a result, you’re not able to access or modify your router’s settings. Furthermore, your internet connection may not work as well. 

Effective Methods to Fix Asus Router Authentication Error 

Here, we have provided some of the best methods to help you fix this issue on your own. Go through all the steps carefully as one of them will help to resolve your issue. 

Method 1: Check the WAN Connection for the Router

Checking the WAN connection is the first thing you should do to fix the authentication error on your router. If the WAN is not connected properly then you will face the authentication error.

Therefore carry out the following instructions to make sure that it is properly connected. 

  1. Connect the Wireless router to the DC-IN port and connect your computer to the wireless router’s WAN port.
  2. Now, power on the router and use another cable to connect the modem to the wireless router’s WAN port.
  3. Finally, when the router is turned on, install the WAN ethernet cable to the router. 

After completing all the setups, check the issue if it has been resolved or not. 

Method 2: Check the IP Address from the Control Panel

After checking the WAN connection properly, you need to check the IP address as well to get rid of this issue. An improper IP address is a principal factor that halts the server connection to the router.

Therefore, follow these instructions to check the IP address for the router on your computer.

  1. Turn on the computer and open the Control Panel from Windows Search. 
  2. Now, when the Control Panel opens, locate the Network and Internet section from the list and click on that.
  3. After that, click the Network Sharing Center option from the left-bottom corner of the screen.
  4. Next, you have yo select Manage Network Connections button from the top of the screen.
  5. After that, scroll the mouse to the bottom and click the Internet Protocol Version 6 (TCP/IPv6) option.
  6. Right-click the option and select the Properties option from the very bottom of the list.
  7. Now, mark the Obtain an IP address automatically from that section and click the OK button to save the changes.

After setting up the proper IP address for your router, restart the device. If the Asus router authentication error has occurred once again, head to the next method.

Method 3: Update the Firmware of your Device

Firmware is a read-only memory chip inside the router that allows the device to set up the security and administrative settings for the network connections. If you are using an outdated firmware or if it is corrupted then you might face this issue.

Hence, proceed with the steps below to update the firmware of your router.

  1. Turn on the computer and open your default browser. Now, head over to the Asus router’s login page and enter the ID and the Password to get into the page.
  2. Locate the Advanced Section from the top of the screen and click on that option.
  3. After that, you need to click the Administration option and then click the Firmware Update option.
  4. Now, the computer will start checking if there any latest version is available or not for your router.
  5. If there any new version is available, click the Download button next to the title and wait for a minute.
  6. Now, when the download is over, click the Install button below the screen.
  7. At last, follow the on-screen instructions and install the software manual for the router device. Finally, restart the Asus router to see if the issue is fixed and the device is now connecting to the server. 

Method 4: Reset your Router 

If the above solutions don’t work for you, then you can reset your router to fix this issue. Resetting a router will cause the router to revert back to its factory default settings. Therefore, follow the steps below to do so. 

  1. First, locate the reset button of your router. Generally, it is located at the back of the device. You can find it by referring to its manual or searching online. 
  2. Next, get a safety pin, needle or something equally thin to press the button with. Thereafter, press and hold the reset button for about 10 seconds. 
  3. Now, your router’s light will start blinking that it has been reset. After it has rebooted, configure your router’s settings once again and the Asus router authentication error will not occur on your system. You have to now login using the default login credentials.  

Wrapping Up…

To conclude, the methods mentioned above should easily help you to fix the Asus router authentication error if it has occurred on your system. If you are still facing this issue then you need to consult the network operator or get in touch with technical support. 

How to Fix Netgear Genie Not Working Error : A Complete Guide

0

Netgear genie not working, is one of the most common issues faced by Netgear users. This issue generally occurs due to a glitch present in the router itself. Thus, you may see this error if you are using a broken router. Other causes of this error include misconfigured internet settings and an outdated firmware.  

Additionally, it is important to note that if your Netgear Genie app is not working, it is simply due to the fact that it has been discontinued. Therefore, you have to install the Nighthawk app to control and modify settings on your Netgear router.  

Effective Methods to Troubleshoot Netgear Genie Not Working

Here, we have provided some excellent methods which you can use to fix this error message on your own. Therefore, simply follow the instructions listed below to resolve this issue. 

Method 1: Test the Internet Setting 

The first thing you should do is test your internet settings. Thus, you can do this by following the steps listed below. 

  1. First of all, restart both your computer and router.
  2. Next, make sure that the modem, computer and ethernet cable are working fine. 
  3. Thereafter, if your internet is not working, then you need to contact your Internet Service Provider. When your internet is back online, check if it fixes this error or not. 

Method 2: Reset Your Router

An effective way to fix this issue is by resetting the router. Therefore, follow the steps given below to do so. 

  1. Navigate to a web browser and type the IP address of the router to access its login page. 
  2. Next, enter your login credentials to modify the settings. 
  3. Head over to Maintenance and you should see an option to reset all its settings. Simply click on it. 
  4. After that, the router will automatically reboot. Now, you have to set up your router once again by entering the necessary Internet settings. 
  5. Once you are done with the steps, check if the issue still persists or not. 

Alternatively, you can reset your Netgear router by pressing the Reset button. Generally, it is located on the backside of the router. If you are unsure, you can go through its user guide or search it online. Thereafter, you have to press the button with a thin object like a needle or a pin. Press and hold for 10 seconds after which the router will be automatically reset. 

Method 3: Update Netgear Router Firmware

As stated earlier, the Netgear Genie may not be working due to outdated firmware. Therefore, you have to make sure that it is updated by following the steps mentioned below.

  1. First, you have to open a web browser and enter the router’s default login IP. Usually, it is either www.routerlogin.net Or 192.168.0.1. 
  2. After that, log in to the router’s page by entering the login credentials. 
  3. Next, head over to Advanced and then go to Administration. If you cannot see Advanced, then you can find Administration under Settings. It differs from model to model. 
  4. Here, select Router Firmware Update and click on Check. 
  5. Now, the router will automatically search for the latest firmware and update it accordingly. 

Conclusion

Hopefully, the methods mentioned above should help you your Netgear Genie to start working again. However, you may require technical support if you are unable to fix this problem by yourself. 

Netgear Router Keeps Dropping : Fix it With Easy Steps

0

The Netgear router keeps dropping issue can appear whenever the device has any kind of internal issues within it. Usually, you can face this issue if the router is not set in a proper way.

Some other reasons for this occurrence include an outdated router firmware or network adapter. 

Methods to Resolve the Netgear Router Dropping Issue

Now, let us see the various methods that can easily resolve this issue on your device. Therefore, try to follow and apply each of the given methods accordingly as one of them will help you to fix your problem. 

Method 1 – Reconfigure the Netgear Router

Incidentally, you may face this problem if the Netgear Router is not configured properly. Thus, you need to configure the router once again to try and fix this issue. You can do this by simply resetting your Netgear router. 

Therefore, follow the instructions below to do so. 

  1. First, you have to locate the reset button on the back of your Netgear router. You can find its exact location in the manual or you can search it online by entering the model number. 
  2. Now, you need to take a thin object to press this button. It can either be a needle, pin or something equally thin. Then, press and hold the reset button for around 10 seconds. 
  3. After that, the router will revert back to its default factory settings and the LEDs will start blinking. 
  4. Now, turn on your computer and access the router’s settings page. You have to enter the default username and password as all the settings have been reset. Thus, you can find it in the manual or search online. 
  5. Finally, configure your network connection once again by entering the relevant information as provided by your Internet Service Provider. 

Method 2 – Update the Network Adapter Driver 

Another way to fix this issue is by making sure that the network adapter driver of the computer is updated to the latest version. Thus, you can do so by following the given steps. 

  1. Press Windows + X button from your keyboard and choose Device Manager from the options. 
  2. From the list, locate and select the ‘Network adapters’ device category. Double-click on the category to reveal the sublist. 
  3. Now, choose the first driver and right-click on it. After that, choose the ‘Update driver’ option, from the popup menu.
  4. Next, choose the first one that says ‘Search automatically for updated driver software’ and wait for the operating system to search for any updates for the driver. 
  5. Once found, it will automatically download and install the latest drivers in your system. 
  6. Repeat the process for all the network drivers and then restart the computer. Check if you’re still experiencing the problem or not. 

Method 3 – Update the Firmware of the Netgear Router

Alternatively, you should also make sure that the firmware of the Netgear router is updated as well. Therefore, go through the following steps to update your router’s firmware. 

  1. First, open a web browser and then visit the router settings page. The default IP address of the router is present beneath the device and is ‘http://routerlogin.net’.
  2.  Now, input the login credentials on the popup dialog box that appears and then enter the default username and password i.e ‘admin’ and password’ respectively.
  3. At this moment, a router configuration settings will open. Within this window choose the following options ‘Advanced’ -> ‘Settings’-> ‘Administration/Settings’-> ‘Administration’.
  4. On the new page that appears, choose either the ‘Firmware Update or Router Update’ option. Next, when another page comes up then, select the ‘Check’ button.
  5. As soon as you do that, then immediately the router will search for any new updates for the firmware.
  6. At last, if there is an update to the firmware available, then simply click on the ‘Yes’ button. Once the firmware update is over next, the router will reboot.

Conclusion

By following all the steps given above, you should be able to solve the Netgear router keeps dropping issue on your router. However, if you’re still experiencing dropping issues, then you need to contact a technician to help you resolve this issue.

Netgear Router Overheating Error | Resolve Heat Up Issues In Simple Steps

0

Netgear routers are known for providing high-speed Internet. However, consistent performance can lead to overheating problems. If it’s occurring for a small duration of time, then there’s nothing to worry about. But, if it goes on for a longer period of time, then Netgear router overheating error will cause some serious consequences.

There can be multiple reasons due to which your router can heat up excessively. This can include defective power connector and/or AC plug. Your device can also exhibit this error when the internal components or circuit is damaged. 

Accumulation of dirt or exposure in a hot environment can also contribute to the overall temperature of your router. If you overuse this device, it can generate overheating error and may lead to burning out as well.  

How to Fix Netgear Router Overheating Error

To resolve the effects of the overheated Netgear router, you can go through the following methods. These will help you to resolve this issue in no time. 

Method 1: Router Clean Up and Maintenance

Ordinarily, overheating can occur due to the accumulation of dust, dirt and foreign particles. Hence, you need to clean up the mess and lower the excess temperature. This requires dismantling the device so you should consult a technician if you are not comfortable with it. 

Also, make sure that your router is turned off when you are not using it for a long period of time. Accordingly, you must also ensure that the router’s airflow is not getting blocked by any dust and crud. 

Method 2- Placement and Cooling Option

Due to a lack of proper airflow through the vents of your Netgear router, it can result in overheating error. Hence, you need to make sure that your device can be cooled down by using proper tools.

For this purpose, you can utilize cooling pads and place the router on it. Alternatively, you can make use of fabs to avoid heating up of the routing device. 

Alongside cooling techniques, the router also requires a hard surface with proper ventilation in its surroundings. Hence, you need to place the router on the surface, which will dissipate the hot air from the device and keep it cool. 

You can also place your router in an upright position to allow maximum airflow to the device. This will help to resolve Netgear router overheating error very effectively.  

Causes of Netgear Router Overheating Error  

Here are some of the problems you will face if you do not fix your router’s overheating issue. 

Internet Disconnection

Overheating in the router can often result in the dropping of WiFi or Internet connection. The degree of damage caused by the heat varies and hence, you will notice that the network gets randomly disconnected from time to time. 

Hardware Failure

The logic board and its components can undergo critical damage after coming in contact with heat. This is why the excessive temperature in the router and connecting cables can result in a major failure. If you don’t sort the error in time, an overheating router can become permanently damaged. 

Flickering or No Light

When you observe that the LEDs on the router device are not blinking, flashing, or flickering, it indicates some kind of error. Basically, this usually occurs when the internal elements are badly affected by the overheating. 

Conclusion 

Lastly, you can update the firmware for the Netgear router to further resolve this issue. Therefore, the Netgear router overheating error could be resolved after these updates. This is because this error can originate due to software issues as well.  

Additionally, you may have to contact technical support if you’re still facing this issue. It can often happen that your router has already been damaged and may not work normally. Thus, buying a new router, in this case, would be more feasible than fixing it. 

How to Fix TP-Link Modem Router Error 020

0

TP-Link modem router error 020 is a common problem on the TP-Link router. Generally, it occurs due to incorrect network parameters which are generally given by the ISP. 

Sometimes, you may encounter this error code 020 when you entered a wrong password while trying to login to your account. In addition, if you do not update the router on a regular basis, then it is possible that the error code occurs due to this.

Effective Methods to Fix TP-Link Modem Router Error 020 

Most of us had encountered the TP-Link modem router error 020 while setting up the router. However, you can easily fix it by going through the following methods. 

Method 1: Check Network Parameters 

The first and foremost thing you should do is to check your network parameters. Therefore, you have to confirm that you’re entering the correct information in the required fields. You need to know the following regarding your network connection. 

  • Virtual Path Identifier (VPI) 
  • Virtual Channel Identifier (VCI)
  • Encapsulation Mode 
  • Connection Type 
  • Username and Password 

Entering any of the above information incorrectly will cause the Router Error 020. Thus, you need to contact your ISP, reset your router and enter the correct details. 

Method 2: Deactivate the IPv6 Settings

Sometimes, TP-Link router error 020 occurs if the router has the IPv6 settings in it. Usually, this hampers the function of the TP-Link router. Therefore, you have to deactivate it by following the instructions below. 

  1. First, login to your router and open the Settings option. Thereafter, move to the Connectivity section and find the Internet Settings option.
  2. Now, locate the option to turn off the IPv6 settings. To do this, click on the checkbox beside it to disable it.
  3. Lastly, click OK to apply the changes. After that, try to open the router and check whether you are getting the same error code or not.

Method 3: Reset the Password

If you are frequently facing the same error code, then you need to reset the password of your router. Hence, you can try to eliminate the error code by following the steps below. 

  1. First, launch a web browser and then enter the IP address of the TP-Link router. Move to the page and select the Change Password option from the left-hand panel of the screen.
  2. In the next page, you need to enter the previous password and then create a password. To confirm the password, you need to enter the new password again.
  3. After successfully changing the password, try to login with the new password and check whether the router is working like before or not.

If you do not remember your password, then you have to reset your router. All routers have a small reset button located on its back. The location differs from model to model. Thereafter, use a small pin or equally thin object to press and hold the button for about 10 seconds, 

After this, you have to log in to your router using the default login credentials. You can find this info on your router’s user guide. You can also search it up on the internet by entering your model number. 

Final Note

At last, you should be able to easily resolve TP-Link modem router error 020 by simply following one of the above methods. In case you’re still facing issues, then you should get in touch with a professional technician to combat this problem. 

How To Setup Tenda Router | A Comprehensive Guide

0

Recently, the new Tenda Router is slowly becoming popular by providing high-speed internet and security. Therefore, we will discuss how to setup tenda router successfully in the following section. 

How to Set up Tenda Router

Incidentally, there are three ways to set up the Tenda Router on your system. These are – 

  • DHCP 
  • PPPoE
  • Static IP

The connection type is determined by the details provided by your ISP. Thus, make sure that you know your connection type beforehand. Thereafter, follow the instructions below carefully. 

Steps to Setup Wireless Settings 

Make sure while you connect your computer to your modem, you have to be online. Physical setup is important to set up the router properly. Next, follow these steps.

  • First, you have to unpack the router box and connect the power adapter to the router. Take the Ethernet cable of your ISP and connect it to your modem by putting it in the blue WAN port of the router.
  • Then, take the spare Ethernet cable and connect your computer to the yellow LAN port of your router. If your system has Wi-Fi features then you do not need to connect your system to LAN.
  • Thereafter, open a web browser and go to 192.168.0.1 by typing it in the address bar. Here, the router’s login page will appear. Now, login to your router using the default login credentials. Thus, type “admin” in the username field and “admin” again for the password.
  • After doing that head over to WLAN settings and click on Basic Settings. Now, click on “Enable Wireless”. Next, type the desired name for your Wi-Fi in the SSID field and click on “Apply”.
  • Now choose “security settings” and go to “Security Mode” to set up your password. Next, go to WPA Personal and select AES. Here, enter the password for your network. After that, you have to change the default “PlsChangeMe” and leave the “key Renewal interval “ field as it is and click on “Apply”.
  • Now, go to WPS Settings> Disable> Save> System Tools> Change password. Here you have to change enter a new username and password where it is written, “admin.” As it is an important page, you must change the login credentials of your router. 
  • Now, close the configuration page of Tenda as you have successfully set up a Tenda home network. Finally, connect your modem to the router’s blue WAN port and restart your modem and router. 

Thereafter, go through the following section to set up your Internet Settings. We have provided the steps for all three connection types. 

Option 1 – DHCP Tenda Router Setup

  1. With your router turned on, open a browser and go to its settings page by entering 192.168.0.1 and pressing enter. Now, enter the login credentials to access the settings page. 
  2. Thereafter, click on “Advanced” link. Here, you have to select your network connection. Thereafter, choose Internet connection Setup and Click on the DHCP server. 
  3. Here, you can Disable or Enable DHCP server. Select “enable”  to bridge your router.
  4. Now you can see two boxes written as Start IP Address and End IP Address. These are the extent of IPs. You can type a start and an end IPs according to your ISP’s configurations.
  5. Thereafter you have to check primary and Secondary DNS servers. Enter the information as given by your ISP. 
  6. Finally, save your changes by selecting Lease Time from the drop-down box and clicking on Save.

Option 2 – Tenda Router in PPPoE Mode

  1. First of all, open your browser and go to 192.168.0.1 . Next, enter your login credentials to access the settings page. 
  2. Thereafter, select Internet Connection Setup and choose PPPoE. Here you will have to enter your PPPoE username and password as given by your ISP.
  3. Finally, click on OK and Restart the router. Your internet connection will be ready for use.

Option 3 – Tenda Router Setup with Static IP address

  1. Similar to previous options, go to 192.168.1.1 login to your router’s settings page by entering your login credentials. 
  2. Choose Internet settings or Internet Connection set up and select “Static IP.”
  3. Now you can see a box where you have to enter IP address, subnet mask, default gateway, and DNS settings on by one. Thus, enter the relevant information correctly in their particular fields. These details will be provided to you by your ISP. 
  4. After the whole process is done click on OK then click on connect. It will activate your internet connection.

Final Words

Lastly, you will now be able to know all there is to set up a Tenda router on your own. Hopefully, you’ve gone through the article step by step very carefully. Any mistake could disrupt the setup process. Additionally, you can contact your ISP or technical assistance if you can’t get to set it up on your own. 

How To Setup Belkin Wireless Router

0

The Belkin N150 wireless router is one of the most popular routers that offer amazing features and outstanding performance. Thus, you must be wondering how to setup Belkin wireless router on your system. 

Belkin router allows all the PC and devices in your home to share the high-speed network connection. Thus, we have provided the complete guide to setup your Belkin wireless router in the following section. 

Simple Guide to Setup Belkin Wireless Router

Go through the following methods to know how to set up the Belkin n150 wireless router. Here, we have provided two different ways to set up any model of the Belkin router. You can follow any one of them according to your own needs. 

Method 1: Using the Belkin Setup Disk

When you purchased the Belkin wireless router, you get a manual and a setup disk in the box. Therefore, you can use this disk to set up your router. Follow the steps below to start the setup process.

  1. First, connect the modem or the Internet cable into the Belkin router. Make sure that the ethernet cable is connected to an open Ethernet port. Now, plug in the router to the power supply and turn it on. 
  2. Next, insert the setup disk in the CD tray. Double-click on the CD icon from the ‘My Computer’ directory.
  3. Thereafter, click on the “Run the Easy Install Wizard” option and then follow the on-screen information to set up the internet connection. After that, you need to create a username and password for your network.
  4. Finally, click on the Finish button and exit from that window. Take out the disk after the setup is completed and restart the system.

Method 2: Using Manual Setup

If you face any problem or you lose the setup disk, then you can set up the router manually. To do this, you need an existing internet connection. Thus, ensure that you connect to a stable internet connection before following the steps below. 

  1. At first, connect the router with an ethernet cable and then switch on the power supply. Then, you need to connect the computer directly to the Belkin router with an ethernet cable.
  2. After that, launch a web browser and enter the default IP address which is written on the router’s box or retailer gave you at the time you purchased it. Now, hit the Enter button to visit the official page of the Belkin router in order to Belkin wireless router setup.
  3. Now, you directly move to the login page. Enter the username and password which is default password, but you can change it later. Click on the login option to enter into the router.
  4. Thereafter, click on the Connection type which is available under the Internet WAN section. Next, you need to select the internet connection type of the list that will appear. After selecting the proper option, click on the Next button.
  5. Lastly, enter the network details provided by the ISP. After that, click on the Apply Changes option. Now, check the status of the Internet Connection under the Connected section.

Final Note 

In summary, the above methods should help you to set up the Belkin wireless router successfully. Posting in the official forums should help you to get assistance from technical professionals. 

How To Update Belkin Router Firmware

0

Updating a router’s firmware is very important for the device for it to operate efficiently. This helps to make the processor more efficient and offer enhanced performance as well. Thus, we have provided the complete guide on how to update Belkin router firmware below.

Easy Steps to Update Belkin Router Firmware

Here we have provided detailed steps for the Belkin router firmware update. Make sure that you follow each of these steps carefully. 

  1. First, open a browser and go to a new tab. Head over to the Belkin’s support page and download the latest firmware for your router make and model. 
  2. Subsequently, close the tab and open a new one. 
  3. Next, enter ‘192.168.2.1’ in the address navigation bar and press enter. Here, the Belkin router login page will open asking for your login credentials. 
  4. Next, enter the necessary login credentials under username and password. If you haven’t changed the username or password previously, then you have to enter the default login info which you can find in your user guide. Ordinarily, the default username and password are both ‘admin’. 
  5. Next, head over to the “Utilities” section and select the “Firmware Update” option. 
  6. Here, you have to browse the directory where you have downloaded the latest update and then select it. 
  7. Open the particular update and then click on the Install option. 
  8. Wait for a few minutes while the firmware is updating. Finally, your router will perform a reboot when it is successfully updated. 

Conclusion 

To summarize, the above steps should easily help you to perform a Belkin router firmware update with no issues. Generally, routers do not come with an auto-update feature. Therefore, you have to manually update the firmware for all types of router. 

20,454FansLike
2,613FollowersFollow
14,700SubscribersSubscribe

Recent Posts